Hello,
I have a SR2612UR server with S5520UR board and RS2bl040 raid controller. I have recentrly installed some Samsung SSD's and the performance was improved but after a few days the server rebooted unexpectedly. In Intel Active System Console i found the following logs:
| 2014-05-12 15:19:08 | BIOS Evt Sensor reports Timestamp Clock Sync. Event is first of two expected events from BIOS on every power on. | Informational | Open | 10.1.1.234 | 177 |
| 2014-05-12 15:20:02 | OS Boot sensor 0 reports the boot from drive C has been completed. | Informational | Open | 10.1.1.234 | 178 |
| 2014-05-12 15:20:02 | Operating system bootup. | Informational | Open | 10.1.1.234 | 179 |
| 2014-05-12 15:19:46 | BIOS Evt Sensor reports a system boot event has occurred. | Informational | Open | 10.1.1.234 | 180 |
| 2014-05-12 15:18:45 | CATERR reports it has been asserted. | CRITICAL | Closed | 10.1.1.234 | 181 |
| 2014-05-12 15:18:50 | Pwr Unit Status reports the power unit is powered off or being powered down. | Informational | Closed | 10.1.1.234 | 182 |
| 2014-05-12 15:18:42 | BIOS Evt Sensor reports Timestamp Clock Sync. Event is second of two expected events from BIOS on every power on. | Informational | Closed | 10.1.1.234 | 183 |
| 2014-05-12 15:18:55 | Pwr Unit Status reports the power unit is powered on. | Informational | Closed | 10.1.1.234 | 184 |
| 2014-05-12 15:18:56 | CATERR reports it has been deasserted. | Informational | Closed | 10.1.1.234 | 185 |
I found on some other forums that C6 State setting from BIOS could cause some troubles and disabling could solve those random reboots. Coult that be the sollution? Is there any side effects for disabling C6 CPU State?
