Galileo rtc wake-up possibilities ?
I read in the Quark Datasheet: "The RTC supports a date alarm that allows for scheduling a wake up event up to 30 days in advance." Can you really wake up the Galileo using the date alarm ? I will look...
View ArticleClik here to view.
Windows 8.1, HD 4600, Audio not showing full HD Capabilities
I have an Asrock Z87 Extreme6 running a 4670K and Windows 8.1 Pro. My AV receiver is an Onkyo TX-NR626 and is DTS-HD capable, connected via HDMI. However Windows only shows DD, DTS and DD+. I have the...
View ArticleRemovable Drive Not Showing Up
I don't know for sure if this is an Intel issue or a Windows issue: I have a DZ68BC MB at BIOS 0039, which seems fine.I have four SATA devices in the system now C:120GB SSD, F:1.5TB, D: 0.5TB, E: DVD...
View ArticleRe: igdkmd64.sys DRIVER_IRQL_NOT_LESS_OR_EQUAL BSOD (Win 8.1 64), updating my...
Well, contrary to what I was intending... I have only played 2 games of league in the past 3 or so days. No blue screens have occurred...yet.
View ArticleRe: Galileo rtc wake-up possibilities ?
Just to add to the question - wakeup implies a sleep. How do you put the chip into a low current sleep state? Is wakeup a reboot, or continue from where you were? What is current drain while asleep?
View ArticleRe: No HDMI Audio output from DN2820FYK
You shouldn't need to reinstall for Windows 8.1. I know your SSD will not show up when you first disable Legacy Boot, but on the next boot it should show up. Jason
View ArticleRe: Is it possible to use intel galileo for bare metal programming?
hello, I connected intel galileo with olimex arm-usb-ocd-h debugger and could use the openOCD console as in the document provided on intel site. can i use this debug console to add my programs to intel...
View ArticleClik here to view.
Re: Galileo rtc wake-up possibilities ?
I keep time with a 3.3v coin battery on board battery connector. Set time for software and then sync clock to hardware. For safety and convenience, I keep it on a holder plugged in a very small blue...
View ArticleRebuilding Mirror Raid -- WHICH Drive is Being Rebuilt??
My RAID 1 mirror worked fine until a couple days ago, when it was triggered to start a rebuild. It seems to now be continuously rebuilding, in that I saw it go to 95% done, and when I looked a few...
View ArticleRe: No HDMI Audio output from DN2820FYK
Thank you, I hope intel can fix this with a driver fix. Why would hdmi audio require UEFI?
View ArticleWin 8.1 / HD4600 known issues
I've been searching these forums for a solution for 2 problems, but I can't find anything that satisfies my needs... There are 2 big problems that are more than just a little annoying1. Screen...
View ArticleRe: Intel® NUC Kit D34010WYK Power Button
I got the same problem using openelec (Generic x86_64 3.2.4) on a Intel NUC D34010WYK. Using the same configuration (even same SSD) on a DC53427HYE works perfectly. I want to mount the NUC at the back...
View ArticleStarting sshd at boot
I am using the galileo linux with ssh. I can start it manually, but it does not start at boot. What do I change? I see directions for using chkconfig, but that utility is not there. This will restart...
View ArticleIntel DZ77BH-55K and Asus Xonar Essence STX not working
Hi Intel-Community, I have a problem with the Intel DZ77BH-55K MoBo. I have flashed the latest Bios 0100 but that didnt solve my problem. I have a Geforce GTX 670 running along with a D-Link DWA-556....
View ArticleInternal ports not working as hot-swappable on DQ77MK
I recently bought a Vantec EZ Swap EX mobile rack enclosure and was trying to set it up but run into a problem that I'm not able to eject a device once it is connected to an internal SATA port, for...
View ArticleDN2820FYK Win 7 64 bit USB3.0 BIOS setting
Using BIOS 0021 reset to defaults (F9). Then, following your instructions for Win 7 Installation. When USB 3.0 (XHCI mode) support is set to enable as your instructions say, my usb 2 mouse/keyboard...
View ArticleRe: eSATA port does not support hot plugging on DQ77MK
I moved another problem with internal SATA ports into a separate topicInternal ports not working as hot-swappable on DQ77MK
View ArticleRe: No HDMI Audio output from DN2820FYK
I think the correct BIOS is: FYBYT10H.86A.0021.EB.WINPE64.EXEFYBYT10H.86A.0021.2014.0116.1801Where did you get the 0024 version?
View ArticleClik here to view.
Re: Intel® Wireless-N 7260 - slows
everything is ok once I installed the Dell release of N 7260 version 16.8.0.6, thanks to theveterans for pointing this out her Driver Details | Dell USit installed perfectly on my Vaio, I don't know...
View Article