Quantcast
Channel: Intel Communities: Message List
Browsing all 20046 articles
Browse latest View live

Re: Custom Solutions Header SMI_SCI_GPIO Pin Source

Mark I would recommend you to post your inquire to the Embedded community.

View Article


Re: NUC D54250WYK2 disabling USB port after shutdown

Thanks a lot for the information Koraltop.  Would you please try to update the BIOS to version 32 Intel® Download Center and let me know the results?

View Article


Image may be NSFW.
Clik here to view.

Re: How best proceed with overheating i7-4790K?

This is with stock settings.  Looks like the MB changes some power limits but everything seems to be within Intel specs.  Compared to what I was getting, I'm content for now.  I can even run IBT now...

View Article

Re: (iot-devkit 1.1) When upload from Arduino IDE 1.5.3 (1.0.4) segfault in...

Hi Chandler; Could you attach the log that you are receiving, maybe a screenshot?  Also I want to know if you could answer me some doubts:1. Are you following the Getting Started Guide and selecting...

View Article

Re: How do I accelerate my HDD using Intel Rapid Storage Technology on my U310?

There are newer RST versions however I would like to find out which one is the best for your system. So we would need to start updating the software. Please try installing version 11.7 Intel® Download...

View Article


Image may be NSFW.
Clik here to view.

Re: Grove - I2C Motor Driver does not work with Arduino Expansion Kit

Hi ek, I've tested the code and it seems to work fine. I don't have the shield to test it but I could get the following:  That is the signal for this code section:  MotorDirectionSet(0b1010);  //0b1010...

View Article

Re: Monitor Mode on Inten Edison

Hello samatt, We reviewed the BCM34341 driver of the Edison's wireless adapter and it seems Monitor Mode is not supported. Regards,            Peter

View Article

Re: Get SMART info from ICH10r raid controller(onboard)?

You could use CSMI to access SMART info if the Intel driver for your onboard controller supports it. Some do, others don't. Ask Intel or try "smartctl --scan". If it outputs "/dev/csmiX,N" for each...

View Article


Re: Edison 64-bit kernel

It also lists the hyperthreading flag as do the docs for the original base soc but I don't see 2 additional logical cores coming up.  Of course hyperthreading is often disabled by bioses without the...

View Article


Image may be NSFW.
Clik here to view.

Re: Edison 64-bit kernel

You mean Windows reported the vendor:product ID the usb gadget driver claimed.  This isn't 'proof' of the exact core used in the SoC.  Intel themselves have stated that a lot has changed from the...

View Article

Unable to Load Wireless-N 7260 Bluetooth Driver

Have been unable to successfully load the Intel driver.  I've tried a number of installation packages (probably all from the last year) and they complete successfully but when you go into Device...

View Article

Re: MRAA not working/ Sys gpio does

if you're at ces i just posted another discussion to see if there was momentum for people to get together, makers and intel

View Article

Re: MRAA not working/ Sys gpio does

Thanks, although I am not at the ces.  Enjoy.

View Article


Image may be NSFW.
Clik here to view.

Re: Webcam throwing distorted Images

CMata_Intel, it looks like most of he picture is there, a possible not ordering of the data after it has arrived out of order? holY_Ghost, The image has to be coming in with a sequence indicator and...

View Article

Re: If there is no Edison labeled disk driver mounted in Windows Computer...

OK, I see. I will try again to see if I can access the Edison through serial connection. Thank you

View Article


Image may be NSFW.
Clik here to view.

Intel HD Graphics Driver update changes screen resolution.

Hello, I was wondering if anyone could help/had a solution for a problem I am having. I tried searching to see if anyone else had the same issue or tried anything different from what I've tried and...

View Article

Re: First day ok with 13V. Second day short circuit

My suggestion for troubleshooting: make sure the lab supply is set for high enough current limit. It could be that the Edison draws too much current at startup, so the lab supply voltage sags. this...

View Article


Servo trouble

I have a fun robot project pretty much wrapped. The last thing to do is work out this bug running multiple servos. I have six HiTec HS-311 servos powered externally. My circuit is definitely good. It...

View Article

Re: Intel 4400 hd idling issues.

That thread has no solutions. What am I supposed to do with that?

View Article

Image may be NSFW.
Clik here to view.

Re: Question about Intel HD Graphics 3000 card

Thanks, Sylvia - Peter

View Article
Browsing all 20046 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>