Re: What is the best i5 processor (apu) for gaming. What processor (apu) can...
would you be able to post a link to live Toshiba support
View ArticleNUC D34010WYK Display issues
Hello, On the 7th of November I have bought an Intel nuc d34010wykh. I have had some display issues that recently have grown worse. My current setup is as follows:NUC connected to TV with mini hdmi to...
View ArticleIntel HD Graphics - Installed in Device Manager,but shows as in advanced...
Windows 7 Professional 64 bitPower management also unavailable. HP Elitebook 840 G1 - This model does NOT have a separate video cardHave tried 6 different versions of HD Graphics downloaded from...
View ArticleIntel HD GRAPHICS CONTROL PANEL SERVICE会造成语言栏的不正常显示。
发现一个问题，Intel HD GRAPHICS CONTROL PANEL SERVICE会造成win7语言栏的不正常显示。本来语言中只有简体中文，却在语言栏多出个CH、EN选项，经过不断观测，排除，确定是这个服务的问题，关掉这个服务就没问题了！
View ArticleRe: Can’t enter the bios via F2 during boot
I have done some several more checks:1. I have checked that BIOS jumper is set to normal mode2. I pushed the power button and hold it down until I heard three short beeps, I then received the Power...
View ArticleRe: Intel Edison simply refuses any USB except serial Putty.
I forgot to mention, that with the mini breakout board, I have found that there are some limitations on USB host mode, in particular if you do something like a soft reboot with USB devices attached,...
View ArticleDN2820FYK no signal randomly
Dear support, I've been having trouble with my nuc in that the signal will randomly cut out. Sometimes there's no sound or it crackles. My TV works fine with all other hdmi devices and this problem...
View ArticleGalileo ftdio_sio.ko module or SD linux image with ftdi_sio module integrated
Hello everybody, I'm using a Galileo board first generation and I'd like to link it to my CC2530 device through USB cable.When I look into my modules, this is what I can see:...
View ArticleClik here to view.
Re: Is there a way to toggle GPIO direction without signaling all pins?
I will have to take a look at this at some point, which display are you using? Sometime I may have to do more work using Eclipse with break points... Currently do most of my debugging the old way...
View ArticleClik here to view.
Re: Computer freezes (hangs) upon Intel SSD Toolbox v3.2.3 launch
Apparently I am using Marvell drivers already, compiled in 2010. No I haven't used Toolbox on any OS other than my current Windows 8.1, since I did a fresh install in that SSD as soon as I got, so as...
View ArticleRe: Building xFSTK on Ubuntu 14.04 (32-bit) for flashing Edison
I was able to get this working on Ubuntu 13.10 64-bit after a bit of playing with it. I had to additionally:Install libusb-1.0-0-devSymlink /usr/lib/x86_64-linux-gnu/libusb-1.0.a at /usr/lib/libusb.a I...
View ArticleRe: Intel Edison an Expensive Arduino Nano
deium,I realize that the Quark is not an ARM device. I only mentioned ARM because ARM doesn't make chips, they license the designs. The lack of information from intel on the Quark within the Edison...
View ArticleLooking for PyBlueZ package
I am looking for PyBlueZ package for Edison board. To program Bluetooth device in Python. Do you know any repository has it so that I can download it using opkg.Thanks,- Sachin
View ArticleRe: Intel Edison an Expensive Arduino Nano
As pointed out in other threads on the forum, Intel is looking to provide the access to Quark in an upcoming release, "hopefully before the end of the year", so I am confident that it is forth coming...
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
I'm hoping to get some good help here. I see that there's been a lot of discussion on heating issues with the I7-4790k. I've been trying to follow the thread as much as I can, but 27 pages of...
View ArticleClik here to view.
Build custom package in a new Yocto layer
Hi guys,Suppose I want to build a new Edison Yocto image with the nano editor made available through a new, custom layer. I want the layer to be custom for educational reasons, otherwise I would have...
View ArticleRe: Kernel build error?
What is the content of your /home/hyon/Edison/edison-src/u-boot/ folder? After a succesfull build, you aren't suppose to have this directory. Delete it and try again the postBuild script. I also get...
View ArticleRe: Intel Edison always starts in rescue (maintenance) mode
Hello everyone! None of you have the same problem?How do to Linux starting automatically? Thanks for the solution!
View ArticleClik here to view.
Re: Intel Edison always starts in rescue (maintenance) mode
Did you update your yocto linux? You can also try posting a little bit more terminal log. I don't see a "Mounting /home" step while booting the latest linux distribution with my hardware configuration....
View Article