Re: Build custom package in a new Yocto layer
Hi Montero, I'm using a fresh Ubuntu 14.04 64bit Server hosted on a VirtualBox VM (I know this is not recommended, but my i7 compiled the original Yocto distribution in about 4 hours). The only files...
View ArticleRe: Core i 'T' processors - real power usage vs. TDP
You are more than welcome. Enjoy!!
View ArticleRe: Does any know if/how you can boot into a UEFI shell on an intel DH67BL MB?
Hi Sylvia, Thanks very much. I did the following to get to a shell so I could flash the card: Get a USB driveDownload USBwriter- http://sourceforge.net/projects/usbwriter/Download Archlinux ISO-...
View ArticleRe: HD Graphics for Previous Generation Core i5 - 661
Excellent! Thanks for sharing the information with us and other users.
View ArticleRe: Unable to Load Wireless-N 7260 Bluetooth Driver
You can try installing the drivers provided by Samsung*. I suggest making sure the Intel® Chipset and Intel® Management Engine drivers are installed first.
View ArticleRe: Unable to Load Wireless-N 7260 Bluetooth Driver
Over the weekend I reloaded the OS and started everything from scratch. I have no idea if I did exactly the same thing as last time but I have it working now. Thanks for the help.
View ArticleRe: Edison opkg package repo created
With the repo you can install PIP :Installing Python Pip on Intel Edison | Michael Hirschopkg install python-pipand then you can install pybluez :pip install pybluezNote that I had some issues with...
View ArticleRe: Native Edison kernel compile successful, kernel hangs without error
Jeff, There are probably many ways to do this... but what I did was first install the Yocto based OS on Edison, and use the opkg command to load the latest kernel and modules from the opkg repository....
View ArticleRe: How best proceed with overheating i7-4790K?
RigItPC wich is the new lote of the processor??
View ArticleClik here to view.
Re: Overscan issue
I am not from Intel, and don't currently have Windows on my 2820 NUC. But if you have the Intel graphics driver, you might double-check their Graphics Properties (Control Panel), in their Display...
View ArticleRe: Adapt the Marlin 3D Printer Firmware to the board galileo gen2
Hi ocanen Have you had any updates or results in this? If not, take a look at this thread I think it could help you on how to start. Best Regards;CMata
View ArticleRe: analog read using python and mraa is not working for me
Hello Raphael,You can SSH into your Edison and execute the following commands shown below in bold: echo"src mraa-upm http://iotdk.intel.com/repos/1.1/intelgalactic"> /etc/opkg/mraa-upm.confopkg...
View ArticleRe: Intel HELP!!!! update utility does not recognize hardware
Hi Mark, I tested the Utility again and it does not function properly. Instead of identifying the driver and providing the latest driver as an option which can be downloaded manually it states this is...
View ArticleRe: how to read uart'data from edison board
Hi Ishan; Try updating the mraa library: (You will need to have a password and wifi set in you Edison) root@edison:~# ifconfig wlan0 up root@edison:~# echo "src mraa-upm...
View ArticleRe: Update Utility 2.0 problem Only sees Wifi card
Hi Mark, I tested the Utility again and it does not function properly. Instead of identifying the driver and providing the latest driver as an option which can be downloaded manually it states this is...
View ArticleRe: Update Utility 2.0 problem Only sees Wifi card
I don't have an ETA for the other components yet. I could use your help with a list of the components in your system. IF you run the online Intel® System Identification Utility - Identify Your Product...
View ArticleAre the new Skylake going to work with +5V PCI buses?
Hello,I am debugging a skylake platform which has a PCIe-to-PCI bridgem I am having issues to get the PCI cards working(many of them), so I am wondering if this new platform supports +5V PCI bus?Regards
View ArticleClik here to view.
Re: DHT workaround for Galileo and Galileo Gen2 using 2 pins instead of one
Hi,I have updated code and schematic that should work better with the DHT22. I originally just posted the diode method since it is simpler and worked well for the DHT11 I used for testing. The more...
View ArticleRe: Arduino 1.6.x - Edison/galileo moving to it?
Hi Kurt; We will share the details of the future Arduino releases as information become available, stay tuned.Best Regards;CMata
View ArticleClik here to view.
Re: problem with bitbaking
Hi Luis_Bucanero; Debian is not supported but you could try with this link EmutexLabs, If doesn't work for you I suggest you to post a new thread with this new question in the communities in order to...
View Article