Clik here to view.
Intel HD 4000 Driver
Hi, I haven't seen a new driver for the HD 4000 for quite a long time.is the new driver under works? any ideas when the next driver for the HD4000 will/would be? a swift reply is most appreciated....
View ArticleRe: Intel HD 4600 and Outlook 2013 - white screen
Thanks - is there a date scheduled for a newer driver release or fix for this issue?
View ArticleRe: NUC D54250WYKH not booting
There has been a new discovery. I started to play with the memory kit I received, and I found the following: 1) NUC BOOTS regardless of which one of the 2 memory SODIMMs I installThis is what the BIOS...
View ArticleNUC D54250WYKH not booting (Memory Socket problem?)
Hi,I have bought a NUC D54250WYKH (The box says it is version# H26246-102).I bought memory from crucial, which they guarantee will be compatible for this NUC:CT5042585 BLS2C8G3N18AES4CEU.16FER 16GB...
View ArticleIntel Celeron N2815 vs 1007U
The site CPUBOSS say that the Celeron N2815 have a 1MB of L2 Cache and the 1007U 0,5MB.The Intel site says that the Celeron N2815 have 1 MB of Cache and the Celeron 1007U have a 2MB of Intel® Smart...
View ArticleRe: Intel HD 4600 cannot display 2560x1440?
Hello all!I have the same problem, can't use 2560x1440 (which is nativ to my display). There are the adapter infos: File Intel(R) HD Graphics 4600.txtI don't see any option for 2560x1440 in the display...
View ArticleRe: UVC Driver Support
Hi, I have compiled a document. 1. Build the image as described in the Board Support Package document. 2. Open the menu config to add the UVC driver support in the driver. build> bitbake...
View ArticleRe: UVC Driver Support
Vinay, did you have to do anything special to get the postBuild.sh script to run? I am having trouble with that step of the BSP guide.
View ArticleRe: UVC Driver Support
Hi Dan, No, there was no change required. When postBuild.sh is executed it gives an error as vmLinuz was not found, this is due to error in postBuild.sh script. Edison image built is of type bzImage...
View ArticleClik here to view.
Re: NUC D54250WYKH not booting (Memory Socket problem?)
I am not from Intel support, but I and others have had similar experience. It often means the memory "density" is not good enough for Intel NUC (too many chips on each side of the SO-DIMM). Maybe it...
View ArticleRe: OSX linux image updating issues
My version is: edison-weekly_build_56_2014-08-20_15-54-05and the url is: http://downloadmirror.intel.com/24271/eng/edison-image-ww36-14.zipWhich of course was provided from:...
View ArticleRe: Edison capabilities inquiry.
Dear JP, Thanks, I would appreciate it. I really like both the small form factor and overall design of the Edison and realize this might not be the sort of project it was targeted for, I've long been...
View ArticleRe: OSX linux image updating issues
JPMonteiro I am not exactly sure what you mean if I have tried to reflash it? Thats what I am saying I am having issues with. Unless I am completely missing the mark
View ArticleRe: OSX linux image updating issues
I finally got it working (with the smaller connector board) but it took a few tries on Mac OS (Yosemite). Here are a few issues to look out for: - The cable connections make a difference. I had a bunch...
View ArticleRe: OSX linux image updating issues
This is the exact error message that pops up right after reboot ota is issued.fatload mmc 0:9 0x6400000 edison-image-edison.ext4;reading edison-image-edison.ext4** Unable to read file...
View ArticleRe: OSX linux image updating issues
raminf I am not quite sure that your issues are the same as mine? I could mount and copy files np. I could screen np. The only thing that I had issues with is the update saying invalid files like...
View Article1V8 for UART?
Is the UART input limited to 1V8 so that a logic level converter needs to interface a Serial device hooked up to the Edison? How about a USB device hooked up to D+/D-?
View ArticleRe: Processor Diagnostic Tool strangeness with/without overclock
I am afraid is not possible to roll back to 0132 or earlier BIOS version:“Due to structural changes in this BIOS version, once a board has been converted to this version or later, it will no longer be...
View ArticleRe: Free Windows SDK + Galileo from Microsoft
Hi thanks for the reply, I have narrowed it down a lot more it is related to an installation of AVG Business, when I turn it off totally it is fine I can ping the board via the board name, when I turn...
View Article