Re: How best proceed with overheating i7-4790K?
Hello , i have intel i7 4790k and GIGABYTE GA-Z97X-UD3H , i make test stress on prime95 vers 28.5 during 10 minutes after i seen on cpu-z the core voltage is 1.430v , in bios all is default , how can...
View ArticleRe: S2600CP4 in OEM case, BMC force update enabled, bmc.nsh fails with an...
The BMC force update was already enabled by moving the jumper from position into position 2-3. An update with the earliest available BMC firmware was already attempted and failed. Thank you. I will now...
View ArticleAsk how to discover localhost (127.0.0.1) in Raid Web Console 2
I have problem to discover host in RAID web Console 2, My server is Intel® Server Board S5520HCT are include in valid for the product(s) listed in software requierements, but when acces to 127.0.0.1...
View ArticleAsk how to discover localhost (127.0.0.1) in Raid Web Console 2
I have problem to discover host in RAID web Console 2, My server is Intel® Server Board S5520HCT are include in valid for the product(s) listed in software requierements, but when acces to 127.0.0.1...
View ArticleRe: Support for the Adafruit 2.8" TFT display for Arduino Edison
KurtE, I bought one of those Galileo boards some time ago, I dont know if the Gen2 has changed anything since then. When i get a board the first think i do for a test is to try out the SIP...
View ArticleRe: How to have Edison reconnect to WiFi automatically?
Thanks Fab-Lab,That's a very useful document you wrote there.I'll get my Edison upgrade to build 68.
View ArticleAsk how to discover localhost (127.0.0.1) in Raid Web Console 2
I have problem to discover host in RAID web Console 2, I downloaded from https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18440, My server is Intel® Server Board S5520HCT are include in valid...
View ArticleRe: NUC3815TYKE ACPI_BIOS_ERROR after using asl /loadtable on ssdt
Hi, Further to my reply above, I flashed the NUC with BIOS version 0032, but it has the same ACPI_BIOS_ERROR error on boot, once the TESTSIGNING ON boot option is set. Mark
View ArticleYellow Screen
I connected my laptop (Windows 8.1) to a boardroom Projector and on completion disconnected by unplugging the cable without closing the presentation. If I now connect to a second monitor, the second...
View ArticleClik here to view.
intel galileo suitable power supply.....
Sir i am using galileo in my robot , which is powered by 12V battery..with( 7805V ) avr atmega16 and few sensors and motors(4)and servos(separate supply for servos)...........but if i try to give 5V...
View ArticleRe: Correct Memory configuration
Unfortunately Dell will not help me since I don't have a service tag for this unit. Thanks for your help.
View ArticleRe: Problem in launching eclipse
By the way I was using Windows xp 32bit. I ran it with 64bit Windows it's normal.
View ArticleRe: How to set baud rate 230400 8E1 for Intel® Galileo
Hi Diego, this is my code and log ===========Code ==========void setup() { lcd.begin(16, 2); Serial1.begin(230400,SERIAL_8E1); lcd.setCursor(0, 0); lcd.print("press select btn. ");}...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
Thank you, it looks like this was a Windows issue somehow - I was able to find the disk in the Device Manager but Windows would not mount it automatically. I started the Disk Manager and it showed no...
View ArticleRe: Serial config support : Serial1.begin( 115200, SERIAL_8N2);
Hey Guy,could you explain meaning of below syntax system("stty -F /dev/ttyS0 9600 cs8 -parenb cstopb");if i want to use baud speed at 230400 ,8 ,parity: E ,stop bit:1how to setupThank youSittipong N.
View ArticleRe: (Intel Smart Connect) Remote Wake Grayed Out
There are 2 chipset drivers available: 1. In the latest D54250WY NUC bundle there is the chipset driver version 10.0.14 from 2014-03-26 -...
View ArticleRe: 17.1.0 wifi adapter disabled after sleep
I managed to resolve my issue of the adapter not working after being woken up from sleep. I had to disable fast start-up in my power settings on Windows 8.1, running drivers 17.1.0 from the intel...
View ArticleRe: Blink example is misleading
I loaded the Windows version of the drivers and the Arduino IDE an got a lot farther: - yes there is another UART ( guessing that there are actually 3), my cables are good, so I'm guessing that my USB...
View ArticleRe: BIOS Updating DH61CR - From 0044 to 0120
Thanks, Sylvia! My PC returns!! Congrats!But, I don't know what happend. Now I can't acess the BIOS SETUP. The BIOS doesn't awnser the commands F2, F7 and F10 and goes directly to Windows... Throught...
View ArticleClik here to view.
Re: Intel AC7260 limited access after sleep
I've tried all of those steps. Card connects for 30 sec. ~ 1 minute then dies. Throughput rates are comparable (while connected) to an old BG card. Who's writing your drivers and doing the hardware?...
View Article